Related Experiment Video
Updated: Sep 13, 2025

Silicon Metal-oxide-semiconductor Quantum Dots for Single-electron Pumping
Published on: June 3, 2015
The Impact of Single-Event Radiation on Latch-Up Effect in High-Temperature CMOS Devices and Its Mechanism
Bin Wang1, Jianguo Cui1, Ling Lv1
1State Key Laboratory of Wide Bandgap Semiconductor Technology, Faculty of Integrated Circuit, XiDian University, Xi'an 710071, China.
Abstract:
This paper investigates the latch-up effect in CMOS devices based on a 28 nm CMOS process within the temperature range of 200 K to 450 K using Sentaurus Technology Computer-Aided Design (TCAD) simulation, with a particular focus on the single-event latch-up (SEL) effect in the high-temperature range of 300 K to 450 K. The physical mechanism underlying the triggering of SEL in CMOS devices at high temperatures is revealed. The results show that when the linear energy transfer (LET) value is 75 MeV cm2/mg, the CMOS devices do not exhibit SEL effects at 300 K and 350 K. However, when the temperature rises to 400 K, a significant latch-up effect occurs, which becomes more pronounced with increasing temperature. Additionally, at a supply voltage of 1.2 V and a temperature of 450 K, the LET threshold for triggering SEL in CMOS devices decreases by 91.4% compared to 75 MeV cm2/mg at 300 K, dropping to 6 MeV cm2/mg. As the temperature increases, the latch-up trigger current of the CMOS devices decreases from 1.18 × 10-4 A/μm at 300 K to 4.65 × 10-5 A/μm at 450 K, and the hold voltage decreases from 1.48 V at 300 K to 1.07 V at 450 K.
Related Concept Videos
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...

