Related Experiment Video
Updated: Sep 13, 2025

Determining the Chemical Composition of Corrosion Inhibitor/Metal Interfaces with XPS: Minimizing Post Immersion Oxidation
Published on: March 15, 2017
Thermodynamic, electrochemical and surface characterization of copper corrosion inhibition in acidic solution using
O Adel1,2, M E Mohamed3,4, E Khamis3,5
1Chemistry Department, Faculty of Science, Alexandria University, Alexandria, Egypt. ola.adelm@alexu.edu.eg.
Abstract:
The use of natural inhibitors offers a sustainable and cost-effective approach to mitigating copper corrosion. In this study, rice straw extract, an agricultural byproduct, was investigated as an eco-friendly corrosion inhibitor for copper in 0.5 M H2SO4 solutions. The corrosion inhibition performance was evaluated using electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization techniques across a temperature range of 25-55 °C. The results demonstrated that the rice straw extract achieved an inhibition efficiency of approximately 91% at 25 °C with a concentration of 0.05 g/L and maintained a significant 69.1% efficiency at 55 °C, suggesting that the inhibition primarily occurs through physisorption of the extract molecules onto the copper surface. Scanning electron microscopy (SEM) analysis further confirmed the protective layer formation, while potential of zero charge (PZC) measurements indicated a negatively charged copper surface in sulfuric acid (- 13 mV). Adsorption isotherm studies revealed a strong binding constant, confirming that rice straw extract is an effective and sustainable corrosion inhibitor for copper in acidic environments.
Related Concept Videos
Electrodeposition
Electrodeposition can...
Corrosion
Precipitation and Co-precipitation
Extraction: Advanced Methods
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...

