Characterization of Rapeseed Oil Oleogels Produced by the Emulsion Template Method Using Hydroxypropyl...

Given health concerns, oleogels are promising substitutes for saturated fats in food products. An emulsion-templated method was used, employing rapeseed oil and hydroxypropyl methylcellulose (HPMC) as the structuring agent, to produce oleogels. Oil-in-water emulsions (50:50 w/w) were prepared with three HPMC concentrations (1.5, 2.0, and 2.5% w/w) and dried convectively at 60, 70, 80, and 90 °C to obtain oleogels. The emulsions exhibited viscoelastic behaviour with a predominant viscous character, G″ > G'. Drying kinetics showed a constant rate period followed by a falling rate period; the latter was satisfactorily modelled using a diffusion-based approach. All oleogels displayed predominantly elastic behaviour but the characteristics depended on the temperature employed during the drying operation and the HPMC content. The mechanical moduli (G″ and G') of the oleogels increased significantly with a drying temperature below 80 °C. Higher HPMC content enhanced structural development and thermal stability. Most oleogels exhibited high oil binding capacity (>85%), which increased with the drying temperature and the HPMC content. A correlation was established between the elastic moduli, oil retention, and the hardness of the oleogels. No significant influences of the drying temperature and the polymer concentration on lipid oxidation and colour samples were determined. These results highlight the importance of selecting appropriate drying conditions based on the desired final product properties.