Impact of Multi-Bias on the Performance of 150 nm GaN HEMT for High-Frequency Applications

This study examines the performance of a GaN HEMT with a 150 nm gate length, fabricated on silicon carbide, across various operational modes, including direct current (DC), radio frequency (RF), and small-signal parameters. The evaluation of DC, RF, and small-signal performance under diverse bias conditions remains a relatively unexplored area of study for this specific technology. The DC characteristics revealed relatively little I_ds at zero gate and drain voltages, and the current grew as V_gs increased. Essential measurements include I_dss at 109 mA and I_dssm at 26 mA, while the peak g_m was 62 mS. Because transconductance is sensitive to variations in V_gs and V_ds, it shows "Vth _roll-off," where Vth decreases as V_ds increases. The transfer characteristics corroborated this trend, illustrating the impact of drain-induced barrier lowering (DIBL) on threshold voltage (Vth) values, which spanned from -5.06 V to -5.71 V across varying drain-source voltages (V_ds). The equivalent-circuit technique revealed substantial non-linear behaviors in capacitances such as C_gs and C_gd concerning V_gs and V_ds, while also identifying extrinsic factors including parasitic capacitances and resistances. Series resistances (R_gs and R_gd) decreased as V_gs increased, thereby enhancing device conductivity. As V_gs approached neutrality, particularly at elevated V_ds levels, the intrinsic transconductance (g_mo) and time constants (τ_gm, τ_gs, and τ_gd) exhibited enhanced performance. f_t and f_max, which are essential for high-frequency applications, rose with decreasing V_gs and increasing V_ds. When V_gs approached -3 V, the S₂₁ and Y₂₁ readings demonstrated improved signal transmission, with peak S₂₁ values of approximately 11.2 dB. The stability factor (K), which increased with V_ds, highlighted the device's operational limits. The robust correlation between simulation and experimental data validated the equivalent-circuit model, which is essential for enhancing design and creating RF circuits. Further examination of bias conditions would enhance understanding of the device's performance.