Mechanisms of clay mineral-induced targeted deposition and synergistic CO2 sequestration potential in the CCUS-EOR...

Strongly water-sensitive reservoirs with high clay content face challenges in conventional development due to clay swelling and impeded seepage. CO2 injection shows potential for enhanced oil recovery (EOR) and carbon sequestration; however, the role of clay minerals in regulating CO2-induced asphaltene deposition and sequestration remains unclear.

We conducted experiments on clay-oil interactions, nuclear magnetic resonance (NMR), measurements of crude oil properties, and long core water flooding tests to evaluate deposition, reservoir damage, and CO2 sequestration.

Results demonstrate that clay minerals significantly promote CO2-induced asphaltene deposition, with the deposition amount in clay-containing crude oil increasing by 37% compared to clay-free systems. The interfacial tension (IFT) between crude oil and CO2 decreases from 15.68 to 12.53 mN/m at 10 MPa with increasing clay content, while crude oil viscosity reduces by up to 43.58% when CO2 injection exceeds 30 mol%. Microscale NMR analysis confirms that clay-asphaltene aggregates preferentially block large pores, reducing reservoir heterogeneity and enhancing CO2 sequestration in medium/small pores. Macroscale long-core experiments highlight the significance of high clay mineral content for geological sequestration, showing that the CO2 sequestration rate increases from 43.15% to 48.21% as clay content rises from 8.35% to 29.92%. Although deposition slightly impairs permeability, it drives CO2 into medium/small pores, thereby achieving a balance between oil recovery efficiency and long-term storage stability.