Influence of Bio-Based Infill Materials on the Fire Resistance of Panelised Timber Wall Assemblies-A Pilot Study

In the pursuit of low-impact and renewable construction materials, various by-products from agriculture, forestry, and the wood processing industry are being explored as potential bio-based infill materials for wall assemblies. This study presents an experimental assessment of the fire performance of timber wall systems composed of block units filled with different lignocellulosic materials, subjected to radiative heat exposure. These assemblies are representative of external walls in contemporary timber-framed buildings. Two configurations were examined: one with sawdust infill and the other with wood pellet infill. Both samples were exposed to radiant heat from the interior side for 60 min, simulating conditions of a fully developed compartment fire. The applied heat flux was 20 kW·m^-2, delivered by a calibrated radiant panel. The results indicate that even minor design variations-particularly the choice of infill material-can significantly influence the thermal response, degradation kinetics of wood-based components, and the overall fire resistance of the wall assembly. The sawdust-filled system exhibited superior performance, achieving an estimated fire resistance rating of 60 min (60 REI). It showed reduced internal thermal degradation compared to the pellet-filled variant, which experienced greater charring depth due to internal voids between pellets, although it maintained structural integrity.