Surface Hardening of Zr-1.0Sn-1.0Nb-0.3Fe Alloy Induced by Laser Surface Remelting
Zhien Ning1,2, Fangli Zhang3, Lu Wu2
1Key Laboratory of Radiation Physics and Technology of Ministry of Education, Institute of Nuclear Science and Technology, Sichuan University, Chengdu 610064, China.
Abstract:
To enhance surface hardness, laser surface remelting (LSR) was performed to treat the surface of a novel nuclear-grade Zr-1.0Sn-1.0Nb-0.3Fe zirconium alloy. A combination of advanced characterization techniques was used to systematically analyze the microstructural features of the samples before and after the LSR treatment, and their correlation with hardness variations was studied. Results show that the LSR-treated surface consists of two distinct microstructural regions: (i) the remelted zone (RZ), characterized by fine lath structures and precipitates distributed along the lath boundaries; and (ii) the heat-affected zone, comprising blocky α phase, α laths, and precipitates. The surface of the LSR-treated samples exhibits a random texture, which is attributed to the selection suppression of α variants during the laser-induced rapid transformation. The average hardness of the RZ reaches 285.7 ± 8.3 HV, ~40% higher than the substrate. This hardness enhancement is ascribed to LSR-induced grain refinement.
