Optimized Hot Pressing of High-Speed Steel-Bronze Composites for Diamond-Reinforced Tool Applications

This study investigates the optimization of hot-pressing parameters for ASP60 high-speed steel composites incorporating CuSn20 bronze alloy for use in diamond-reinforced tool applications. ASP60 and CuSn20 powders were characterized using XRD, XRF, DSC, SEM, and laser diffraction. The effects of CuSn20 addition at varying concentrations and compaction temperatures (950-1050 °C) on porosity, mechanical properties, and tribological performance were evaluated. Results showed that adding CuSn20 significantly reduced residual porosity due to its partial melting during compaction, which facilitated particle rearrangement and densification. Optimal conditions were identified at 1050 °C with 9.8 wt.% CuSn20, yielding minimal porosity (~3.7%) and the highest bending strength (374.51 ± 36.73 MPa). The optimized matrix was further reinforced with TiC-coated diamond particles at concentration c = 20, producing a composite material with excellent wear resistance, despite minor defects in the TiC coating observed on fracture surfaces. Tribological testing demonstrated that CuSn20 consistently lowered friction coefficients across all tested temperatures due to its self-lubricating properties and partial melting at elevated temperatures. Furthermore, ASP60 exhibited no measurable wear, making it a promising candidate for highly demanding applications. Overall, the study demonstrates that CuSn20 alloy enhances densification, mechanical performance, and tribological behavior of ASP60-based composites, indicating their strong potential for aggressive wire sawing and stone-cutting tool applications.