Related Experiment Video
Updated: Jan 17, 2026

Modeling the Functional Network for Spatial Navigation in the Human Brain
Published on: October 13, 2023
Investigating the coupling relationships of railway safety risks using the N-K model and complex network theory
Jiaxu Chen1,2, Lin Zhao1,2, Jinghui Liu1,2
1China Academy of Railway Sciences, Railway Science & Technology Research & Development Center, Beijing, China.
Abstract:
To quantitatively analyze the coupling relationships between railway safety risk factors, identify key factors contributing to railway accidents, and develop scientific strategies for accident prevention, this study introduces a complex network-based N-K model to investigate the coupling relationships of railway safety risk factors. First, we identified 18 railway safety risk factors by analyzing case data from railway accidents. The occurrence probabilities and coupling values of these risk factors were then calculated using the N-K model. Subsequently, based on the constructed railway safety risk complex network, reachability and centrality analyses were performed to determine the key factors of railway safety risk. Results indicate that the occurrence of railway accidents is directly proportional to the risk coupling value; the greater the number of coupling factors, the higher the risk value. The coupling of personnel factors and equipment factors is particularly prone to leading to railway accidents. Conversely, effective management of the coupling between personnel and equipment factors can significantly reduce the likelihood of accidents. Inadequate maintenance and unsafe human behavior were identified as critical factors contributing to railway accidents and should be prioritized in prevention efforts.
More Related Videos
Related Concept Videos
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
Nodal Analysis
Consider, for instance, a simple circuit composed of three nodes and three resistors, as shown in...
Nodal Analysis with Voltage Sources
Consider a circuit that contains four resistors and two voltage sources, as shown in Figure 1. One of these voltage sources is connected between a...
Cable Subjected to a Distributed Load
Electrical Systems
To derive the transfer function, consider an RLC...
Network Function of a Circuit

