An Integrated Low-Cost Underwater Navigation Solution for Divers Employing an INS Composed of Low-Cost Sensors Using...

Divers' navigation heavily depends on their experience and physical condition, and accidents caused by failure to return occur every year. To address this issue, we developed a navigation system for divers. This navigation system leverages Raspberry Pi and low-cost sensors, including an accelerometer, gyro sensor, geomagnetic sensor, and pressure gauge, to guide divers along predefined routes back to their starting point. The system employs a 20 Hz sampling frequency and applies high-pass filtering (HPF) to acceleration signals to eliminate gravitational interference. Velocity integration errors are corrected using the rate of pressure change, while impulse noise in accelerometer and geomagnetic sensors is removed via the Robust Kalman Filter (RKF). A time-varying system noise covariance matrix enhances accuracy during rotational states. Quaternion-based attitude avoids gimbal lock, with the Kalman Filter (KF) fusion of accelerometer/geomagnetic data mitigating gyro sensor drift. Forced oscillator trials achieved pitch/roll RMS errors of ±1.23° and ±0.26°. In Kanagawa, Japan, divers successfully navigated 44 waypoints (<5 m spacing) along a route with obstacles (30 m rope, Authors, reefs), with a start/end GNSS positioning error of 6.67 m.