Related Experiment Video
Updated: Jan 16, 2026

Clean Sampling and Analysis of River and Estuarine Waters for Trace Metal Studies
Published on: July 1, 2016
Planning Considerations Related to Contamination Control for the Return and Analysis of Martian Samples
Alex L Sessions1, Cara Magnabosco2, Hazel A Barton3
1Division of Geological & Planetary Sciences, California Institute of Technology, Pasadena, California, USA.
None:
The joint National Aeronautics and Space Administration and European Space Agency Mars Sample Return (MSR) Campaign is a proposed multi-mission effort to bring selected geological samples from Mars to Earth for the purpose of scientific investigation. Significant parts of these investigations could be affected by Earth-sourced contamination that is either misinterpreted as having a martian origin or that masks a martian signal. The Mars 2020 Perseverance rover implemented strict contamination control requirements to limit contamination of the samples during sample collection. Contamination control and contamination knowledge requirements have not yet been established for the samples after they arrive on Earth. The MSR Sample Receiving Facility (SRF) Contamination Panel (SCP) was tasked with defining the terrestrial biological, organic, and inorganic contamination limits for martian samples during their residence inside the SRF. To reach our recommendations, the SCP studied (i) the previously proposed limits and rationale of the Organic Contamination Panel, (ii) cleanliness levels achieved for sampling hardware by the M2020 mission, (iii) recent improvements in analytical technology and detection limits, (iv) updated information regarding the organic content of martian samples (e.g., from the Sample Analysis at Mars instrument on the Curiosity rover and laboratory analyses of martian meteorites), and (v) information about the composition and geologic context of samples being collected by the Perseverance rover for return to Earth.
More Related Videos
Related Concept Videos
Sample Preparation for Analysis: Overview
Bulk or large solid samples are typically reduced in size using grinding, crushing, or milling techniques to increase the...
Contaminants and Errors
Another key consideration is determining the appropriate number of samples required to...
Sample Handling
Samples should be transported carefully from collection points to the laboratory. They should be properly sealed and clearly labeled to prevent cross-contamination. To preserve the sample integrity, optimal temperature conditions during transport are essential. This could involve using...
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...

