Related Experiment Video
Updated: Jan 15, 2026

Flow-assisted Dielectrophoresis: A Low Cost Method for the Fabrication of High Performance Solution-processable Nanowire Devices
Published on: December 7, 2017
GaN Nano Air Channel Diodes with Ultralow Turn-On Voltages for NAND Logic Circuits
Yazhou Wei1,2, Haiquan Zhao1, Feiliang Chen1
1School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China.
None:
Nano air channel transistors (NACTs) have gained attention as promising alternatives to traditional solid-state devices due to their near-ballistic electron transport in air and resistance to harsh conditions. However, their applications in logic circuits remain limited by high operating voltages, low output currents, and integration challenges. This paper introduces a GaN-based nano air channel diode (NACD) featuring a planar tip-to-edge structure with a sub-10 nm tip radius, fabricated by focused ion beam (FIB) technology. This device demonstrates an ultralow turn-on voltage down to 0.2 V, a current density exceeding 1 × 106 A cm-2, and a rectification ratio of over 1000. In addition, the electrical performance and current noise behavior of NACDs with different channel lengths are also investigated. Notably, two rectifying GaN NACDs with a common anode are prepared to enable NAND logic circuits. Remarkably, the device exhibits high stability and reliability, maintaining its performance after more than 34 months. Our findings address key challenges in NACTs for logic circuits and present a practical approach to constructing high-performance, integrated circuits and systems based on NACTs.
Related Concept Videos
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
Diode: Reverse bias
Diode: Forward bias
The behavior of a diode in forward bias...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Schottky Barrier Diode
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...

