Related Experiment Video
Updated: May 2, 2026

A Simple Method for Automated Solid Phase Extraction of Water Samples for Immunological Analysis of Small Pollutants
Published on: January 1, 2016
Deployment of Solid-Supported Natural Deep Eutectic Solvents via Unmanned Aerial Vehicles to Preconcentrate
Vagner Bezerra Dos Santos1,2, Carlos D Garcia2, Helayne S de Sousa1
1LIA3 - Applied Analytical Instrumentation Laboratory, Department of Fundamental Chemistry, Federal University of Pernambuco, Av. Journalist Anibal Fernandes, S/N, University City, Recife, PE 50740-560, Brazil.
Abstract:
A simple analytical methodology for extraction and electroanalytical detection of 2-nitrophenol in water is herein presented. The method is based on the preconcentration of the model contaminant on a solid support (sponge) soaked in hydrophobic natural deep eutectic solvents (decanoic acid and menthol) and deployed using an adapted unmanned aerial vehicle. The subsequent analysis was performed electrochemically via square wave voltammetry and boron-doped diamond electrodes. Under optimized conditions, the proposed approach required dipping the sponge impregnated with a hydrophobic NADES in the water sample for only 5 min (well under the autonomy of the drone) and led to a linear range of 0.0250-35.0 μmol L-1 and a limit of detection of 2.8 nmol L-1. Competitive recovery assays (99 ± 5%) as well as intraday (1.62%) and interday (2.60%) were also obtained, supporting the feasibility of the proposed analytical approach. Moreover, the interferent assays were performed using cations and anions commonly found in environmental waters, which showed no significant effects.
More Related Videos
08:57VacuSIP, an Improved InEx Method for In Situ Measurement of Particulate and Dissolved Compounds Processed by Active Suspension Feeders
Published on: August 3, 2016
07:13Early Detection of Cyanobacterial Blooms and Associated Cyanotoxins using Fast Detection Strategy
Published on: February 25, 2021
Related Concept Videos
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...
Capillary Electrophoresis: Applications
Capillary zone electrophoresis (CZE) separates ionic components based on their electrophoretic mobility. It has been used to separate proteins, amino acids,...