Related Experiment Video
Updated: Jan 13, 2026

Tracking Infiltration Front Depth Using Time-lapse Multi-offset Gathers Collected with Array Antenna Ground Penetrating Radar
Published on: May 1, 2018
A Low-Cost Dual-Frequency Dual-Polarized Antenna Array with High Gain
Jin-Dong Zhang1, Min Wang1, Wen Wu1
1Key Laboratory of Near-Range RF Sensing ICs and Microsystems (NJUST), Ministry of Education, School of Electronic and Optical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China.
Abstract:
A high-gain microstrip antenna array is proposed. The dual-frequency and dual-polarization characteristics of the array allow a satellite communication system to transmit and receive signals with a single antenna. To avoid high losses in microstrip feed lines for large apertures, the array is divided into subarrays, each fed by a low-loss separate feed network. The dual-frequency dual-polarization function is realized by utilizing two orthogonal modes of a corner-fed rectangular patch in a single-layer substrate. Moreover, to minimize losses in the separate feed network, semi-ridged coaxial lines and five four-way radial power dividers are employed. The power divider, composed of a cylindrical cavity and five SMA connectors, features very low insertion loss. Finally, to validate the design concept, a prototype of the proposed 32 × 32-element array operating at 12.5 GHz and 14.25 GHz is fabricated and measured. The measured results are in good agreement with the simulated ones. The -10 dB return loss frequency bands for the two operating frequencies are 12.04 GHz-12.69 GHz and 13.82 GHz-14.66 GHz, respectively. The measured gains at the two operating bands are 34.5 dBi and 35.2 dBi, respectively.
Related Concept Videos
MOSFET Amplifiers
Maximum Power Transfer
By substituting the entire circuit with...
The Midpoint Formula
Design Example: Capacitance Multiplier Circuit
The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.
Mesh Analysis for AC Circuits
The process of harmonizing these impedances begins with a clear understanding of the input and output signals. Once these signals are known, the...
Cascaded Op Amps
In a cascaded system, each op-amp is referred to as a stage. The output of one stage drives the input of the subsequent stage. As the input signal passes through...

