Related Experiment Video
Updated: Aug 14, 2026

Fabrication of a Bioactive, PCL-based "Self-fitting" Shape Memory Polymer Scaffold
Published on: October 23, 2015
Development and characterization of manganese-doped hydroxyapatite-incorporated wet-electrospun polycaprolactone
Alaleh Samiei1, Hossein Jodati1, Zafer Evis1,2
1Department of Biomedical Engineering, Middle East Technical University, Ankara 06800, Türkiye.
None:
Bioceramic-incorporated polymer-based scaffolds have gained more interest as a promising and effective approach in bone tissue engineering (BTE) applications. This study is the first to investigate the role of incorporated manganese-doped hydroxyapatite (Mn-HA) and gelatin coating in increased bioactivity and biological properties, specifically the cell attachment potencies of three-dimensional (3D) porous electrospun polycaprolactone (PCL). In this context, novel 3D porous composite scaffolds were synthesized by wet electrospinning of PCL incorporated with Mn-HA. The scaffolds were then coated with a thin gelatin layer to enhance the cell adhesion capacity. The effects of Mn-HA and the gelatin coating were evaluated in terms of structural, physicochemical, and biological properties. The results demonstrated that Mn-HA was successfully synthesized with doping of 2 mol% Mn, with MnSO4(manganese sulfate) and MnCl2(manganese chloride) precursors. Mn-HA powder with a MnSO4precursor indicated better cell viability results. Therefore, Mn-HA/PCL scaffolds with 2.5% and 5% (w/w) bioceramic content were prepared with the MnSO4precursor. The scaffolds' porosity increased from 24% (PCL/gelatin group) to approximately 34% in both the 2.5% and 5% (w/w) bioceramic-containing groups. The addition of Mn-HA powder improved thein vitrobioactivity and degradation rate of the scaffolds. Specifically, the 5% and 2.5% (w/w) Mn-HA incorporated scaffolds indicated 40% and 30% weight loss after 21 d of incubation, respectively. In contrast to the PCL/gelatin and HA-containing groups, the Mn-doped HA containing scaffolds exhibited a weight loss of around 17%-20%, indicating a decrease in degradation. The presence of the Mn-HA powder and gelatin coating elevated the cell viability results significantly, as opposed to the PCL scaffolds. Incorporation of 5% (w/w) Mn-HA improved the alkaline phosphatase activity and intracellular calcium levels, contrary to other groups. Thus, the incorporation of Mn-doped HA and gelatin into the PCL scaffold supports the potency towards properties required for BTE applications and suggests it as a prospective biomaterial for further evaluations.
More Related Videos
13:46A Facile and Eco-friendly Route to Fabricate PolyLactic Acid Scaffolds with Graded Pore Size
Published on: October 17, 2016
12:28Melt Electrospinning Writing of Three-dimensional Poly(ε-caprolactone) Scaffolds with Controllable Morphologies for Tissue Engineering Applications
Published on: December 23, 2017
Related Concept Videos
Anionic Chain-Growth Polymerization: Overview
Cationic Chain-Growth Polymerization: Mechanism
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the polymer...
Accelerators
The effectiveness of calcium chloride can...
Retarders
The function of retarders is to delay the setting of concrete, and this effect can be measured using a penetration test. The retardation process involves adding...
Plasticizers
Plasticizers function by using surface-active agents to create repulsive electrostatic forces between cement particles. This dispersion enhances the concrete's...