Related Experiment Video
Updated: Jan 11, 2026

Synthesis of Hydrogels with Antifouling Properties As Membranes for Water Purification
Published on: April 7, 2017
Bioinspired MOF-Based PVA/TA Hybrid Membrane with Superior Mechanical Durability and Antifouling Properties for
Aamal Rehman1, Manzar Sohail1, Ghazala Razaq Abbasi1
1Department of Chemistry, School of Natural Sciences, National University of Sciences and Technology, Islamabad 44000, Pakistan.
Abstract:
Separation of emulsified oily wastewater poses a significant challenge due to ongoing problems such as severe membrane fouling and low separation efficiency. Metal-organic frameworks (MOFs) are widely regarded as viable candidates for separation applications due to their high surface area and tunable properties. However, forming a stable and uniform MOF-based separation layer on membrane supports remains a significant challenge. The complex synthesis procedures and limited mechanical flexibility of conventional MOF membranes have hindered their adoption for oil-in-water separation. In this research work, MIL-101(Fe) was prepared and successfully used to construct a barrier layer on membrane surfaces via a simple vacuum-assisted filtration method. Notably, tannic acid (TA) exhibited excellent compatibility with MIL-101(Fe), acting as a natural binder that reinforced the MOF layer. This interaction yielded a highly stable and flexible separation layer, addressing the key limitations of traditional MOF membranes in treating complex oily wastewater. The MIL-101(Fe) based membranes have shown excellent stability against tape peeling, continuous water flushing, bending, and sonication tests. Furthermore, the PTM membrane exhibited superior antifouling properties, with UWOCA of 162.6°, indicating strong oil repellency. Its hydrophilic surface facilitated rapid water transport, leading to a separation efficiency exceeding 98% when treating oil-in-water emulsions with a concentration of 1000 ppm. The membrane performance is not compromised under several cycles of reusability, and an unprecedented 99.1% flux recovery was observed. This work has demonstrated that, with the appropriate engineering, a stable and effective MIL-101(Fe) coating can be developed on the surface of the support membrane, offering outstanding separation efficiency, durability, and abrasion resistance. This makes it an effective solution for addressing complex oily wastewater streams.
More Related Videos
07:45Electrophoretic Crystallization of Ultrathin High-performance Metal-organic Framework Membranes
Published on: August 16, 2018
08:59Synthesizing a Gel Polymer Electrolyte for Supercapacitors, Assembling a Supercapacitor Using a Coin Cell, and Measuring Gel Electrolyte Performance
Published on: November 30, 2022