Oil Effect on Improving Cracking Resistance of SBSMA and Correlations Among Performance-Related Parameters of Binders...

Asphalt binders that perform exceptionally well in resisting both rutting and cracking are highly desirable for withstanding the combined effects of extreme low temperatures and heavy vehicle loads. This work highlights the benefits of softening oils on the cracking performance of styrene-butadiene-styrene-modified asphalt (SBSMA). Additionally, the inherent correlations between cracking-performance parameters of binders and mixtures were thoroughly analyzed. A bio-based oil (bio-oil) and a petroleum-based oil (re-refined engine oil bottom, REOB) were selected as the softening oils. The benefit provided by softening oils was evaluated using various rheological indices, while the adverse effects of oxidative aging on cracking resistance were also considered. The cracking properties at intermediate temperatures were characterized by the modified Glover-Rowe (M G-R) parameter, δ_{8967 kPa}, and fatigue life (N_f). The low-temperature cracking properties of binders were evaluated by stiffness and m-value. The indirect tensile asphalt cracking (IDEAL-CT) test was conducted utilizing the CT-index and post-peak slope to estimate the fracture properties of the mixtures. The oxidative aging of binder and mixture samples was simulated and carried out based on lab aging methods; meanwhile, the carbonyl index obtained from the Fourier transform infrared (FTIR) scanning was used to track and evaluate the aging level of binders. The results show that the cracking performance could be greatly improved by the application of softening oils. Meanwhile, the bio-oils were found to operate with much higher efficiency than REOB, since the oil modification index (OMI) result showed that bio-oils exhibited four to six times the efficiency of REOB, in terms of improving the stress relaxation property. The correlations proved that the cracking-related parameters shared an inherent relationship with R² above 0.85, while these parameters consistently declined as the binder aged. The cracking performance of the mixtures at intermediate temperatures was mainly governed by the fatigue life of the binder, whereas thermal cracking performance was highly associated with the binder's relaxation property.