Modification of Sunflower Stalks as a Template for Biochar Adsorbent for Effective Cu(II) Containing Wastewater...

Sunflower stalks derived biochars were fabricated through sequential alkali/enzymatic pretreatment, carbonization, and chitosan modification, and were used as eco-friendly adsorbents for Cu (II) removal from wastewater. The effects of pH, temperature, adsorption time, and dosage of biochar on Cu (II) adsorption separation from the model solution were comprehensively investigated. Results demonstrated that the chitosan treatment of biochar, obtained from the carbonization of pretreated sunflower straw, significantly altered the porous structure and surface functional groups of the material. Specifically, the biochar carbonized at 500 °C and subsequently treated with chitosan exhibited optimal adsorption performance at pH 5 and 35 °C. Under these conditions, a maximum Cu(II) adsorption capacity of 268.2 mg g^-1 (of biochar) was realized. Further analysis indicated the Cu(II) adsorption generally followed pseudo-second-order kinetics (R² > 0.99). Langmuir isotherm modeling revealed that the biochar modified by NaOH and chitosan displayed the highest correlation coefficient (R² > 0.99), suggesting predominantly homogeneous monolayer adsorption. Therefore, the novel low-cost and environmentally friendly biomass-derived adsorbents demonstrate significant potential for effective treatment of the heavy metal-contaminated wastewater.