Analysis of per- and polyfluoroalkyl substances (PFAS) removal with activated carbon using ¹⁹F nuclear magnetic...

Per- and polyfluoroalkyl substances (PFAS) are a toxic and environmentally persistent class of chemicals that are associated with a myriad of adverse health effects in humans. Activated carbon is an effective material for the removal of PFAS at water treatment plants, but there is a necessity to find new, superior coal-derived and biomass-derived forms, due to the increasing accumulation of PFAS in treatable water sources and the need to shift to biomass-derived adsorbent usage to offset the carbon emissions released during their production. Additionally, current methods of PFAS detection and quantification utilise expensive and laborious analytical techniques, such as liquid-chromatography with tandem mass spectrometry. In this study, four commercial activated carbons (CAC-1, CAC-2, CAC-3 and CAC-4) had their chemical/textural properties characterised and had their PFAS removal performances investigated using four different PFAS types (PFBS, PFHxA, PFOA AND PFOS), with detection and quantification conducted with ¹⁹F nuclear magnetic resonance (¹⁹F-NMR). The adsorption results revealed the overall ranking of adsorbents by performance as CAC-4 > CAC-3 > CAC-2 > CAC-1, with CAC-4 being the highest ranking adsorbent for removing all four PFAS, due to a high surface area coupled with superior mesoporosity as well as containing a higher concentration of surface oxygen-containing functional groups, which fortify adsorption with favourable hydrophobic interactions and electrostatic interactions, respectively. Moreover, the effective use of ¹⁹F-NMR for the detection and quantification of total PFAS content after activated carbon treatment was demonstrated, with the use of inexpensive internal standards and a near-complete lack of sample clean-up. As such, quantitative ¹⁹F-NMR can be a viable, low-cost alternative to current PFAS analytical techniques for the screening of new adsorbent media.