Related Experiment Video

Updated: Feb 20, 2026

Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer
08:29

Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer

Published on: January 10, 2017

9.5K

A natural multifunctional antisolvent additive for efficient full-air-processed carbon-based perovskite solar cells

Yiqiong Zhang1, Xiangqian Cui1, Xinyi Zhang1

  • 1School of Chemistry and Chemical Engineering, Nantong University, Nantong 226001, Jiangsu, China. mmwang0528@ntu.edu.cn.

Chemical Communications (Cambridge, England)
|February 18, 2026
PubMed
Abstract

More Related Videos

Flash Infrared Annealing for Perovskite Solar Cell Processing05:15

Flash Infrared Annealing for Perovskite Solar Cell Processing

Published on: February 3, 2021

8.7K
Low Pressure Vapor-assisted Solution Process for Tunable Band Gap Pinhole-free Methylammonium Lead Halide Perovskite Films08:12

Low Pressure Vapor-assisted Solution Process for Tunable Band Gap Pinhole-free Methylammonium Lead Halide Perovskite Films

Published on: September 8, 2017

10.1K

Related Concept Videos

P-N junction01:11

P-N junction

A p-n junction is formed when p-type and n-type semiconductor materials are joined together. At the interface of the p-n junction, holes from the p-side and electrons from the n-side begin to diffuse into the opposite sides due to the concentration gradient. This diffusion of carriers leads to a region around the junction where there are no free charge carriers, known as the depletion region. The charge density within the depletion region for the n-side and p-side can be described by the...
1.4K