Related Experiment Video
Updated: Feb 28, 2026

Advanced Self-Healing Asphalt Reinforced by Graphene Structures: An Atomistic Insight
Published on: May 31, 2022
Reliability-Based Recycling of Reclaimed Asphalt Pavement Using a t-Distribution Guarantee Rate Method and a Ternary
Yuanyuan Li1, Bowen Hu1, Kefeng Bi1
1School of Civil Engineering and Architecture, Wuhan Institute of Technology, Wuhan 430074, China.
Abstract:
Large-scale use of reclaimed asphalt pavement (RAP) is limited by strong gradation variability, uneven recovery of aged asphalt (AA), and an incomplete understanding of the rejuvenation mechanism. This study combines source evaluation, composite rejuvenation, and multi-scale analysis to improve AA recovery. A gradation variability model was developed using the t-distribution, and a reliability-based method was proposed for reclaimed material selection and mix design. Rejuvenator 1 (R1) was identified as the best option, and a ternary composite rejuvenation system was formed using R1, SBS-modified asphalt, and base asphalt (BA). AA performance was assessed using physical and rheological tests, supported by Fourier-transform infrared spectroscopy, fluorescence microscopy, and gel permeation chromatography. The t-distribution guarantee rate method quantified RAP gradation fluctuations effectively. At a 90% guarantee rate, the deviation in key sieve pass rates was below 3%, indicating stable sources. In the composite system, 10% R1 restored AA high temperature performance, while adding 30% SBS modified asphalt and BA improved low-temperature crack resistance. The micro analyses showed no new functional groups after rejuvenation. Recovery was mainly driven by physical blending, dilution, and optimisation of the molecular-weight distribution.
Related Concept Videos
Segregation in Fresh Concrete
Distribution Reliability and Automation
Design Example: Aggregate Gradation
The grading, or particle-size distribution, of sand is determined using sieve analysis, with standard sizes ranging from 150 μm to 10 mm (ASTM No. 100 sieve to 3⁄8 in. sieve). Sand is...
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...
Toughness and Hardness of Aggregate
Compacting Factor test
The procedure begins by placing concrete into the upper hopper without any compaction. Once filled, the bottom door of this hopper is opened,...

