Related Experiment Video
Updated: Feb 28, 2026

The Effect of Construction and Demolition Waste Plastic Fractions on Wood-Polymer Composite Properties
Published on: June 7, 2020
Environmental Life Cycle Assessment of Selected Materials-Building Façades in Poland
Dorota Burchart1, Krzysztof Schabowicz2
1Faculty of Transport and Aviation Engineering, Silesian University of Technology, Krasińskiego 8, 40-019 Katowice, Poland.
Abstract:
The use of sustainable building materials is becoming increasingly important in order to reduce their environmental impact. This article draws attention to the lack of life cycle assessment (LCA) of building façades, which would take into account national conditions. The aim of the work is to assess the environmental impact of various building façade solutions. The analysis concerned a ventilated façade on an aluminum substructure with a fiber cement board and external thermal insulation composite system (ETICS) with expanded polystyrene (EPS). The assessed façades differed with regard to the used insulation materials. The study aims to select more ecological façades, while at the same time taking into account national conditions, which is important at the stage of designing a building. The study also aims to fill a gap in the existing literature by providing information concerning the environmental analysis of building façades based on real data. Based on a comparative analysis, it was shown that ETICSs with EPS have higher façade-damage category indicators in all impact categories except for eutrophication, human toxicity (carcinogenic and non-carcinogenic), and resource use related to minerals and metals, for which the ventilated façade shows higher values. Additionally, hot-spots for the analyzed façades were also presented. In the case of a ventilated façade, the determinant is the used insulating material, which is mineral wool. In the case of ETICS, it is the finish coat. For the first time in Poland, the LCA of a ventilated façade and ETICS was presented based on real data. The results of this study can be used as the first step of a full cradle-to-grave LCA for buildings.
More Related Videos
09:39Production and Testing of Moisture Behavior and Thermal Properties of Rapeseed Straw and Ganoderma resinaceum Mycelium Bio-Composites
Published on: September 5, 2025
07:48Artificial Thermal Ageing of Polyester Reinforced and Polyvinyl Chloride Coated Technical Fabric
Published on: January 29, 2020
Related Concept Videos
Design Example: Sustainability in Concrete Building
There are multiple approaches to achieve sustainability in a commercial concrete building. For instance, construct a concrete parking area under the building, utilizing pervious concrete paver blocks in open areas to facilitate rainwater collection through an underground...
Thermal Insulation in Masonry Walls
External insulation can be applied using an Exterior Insulation and Finish System (EIFS), which involves affixing panels of plastic foam to the wall and covering them with a polymeric stucco reinforced with glass fiber mesh....
Masonry Curtain Walls
Composite Masonry Walls
Cavity Drainage and Flashings in Masonry walls
Weep holes, strategically placed at the base of the cavity, are critical for draining accumulated water. These openings are created by leaving head...
Brick Durability, Strength, and Appearance