Related Experiment Video
Updated: Mar 3, 2026

Sandy Soil Improvement through Microbially Induced Calcite Precipitation MICP by Immersion
Published on: September 12, 2019
Cow-dung stabilised compressed earth blocks: a mechanistic approach to understand its water resistance behaviour
Yask Kulshreshtha1, Philip J Vardon1, Gabrie M H Meesters2
1Faculty of Civil Engineering and Geosciences, Delft University of Technology, Delft, The Netherlands.
Abstract:
Cow-dung is a widely used stabiliser applied in traditional earthen buildings with one objective to improve water resistance. However, most research has focused on explaining its mechanical strength, with only one study suggesting water resistance mechanism via formation of insoluble compounds at high pH, a phenomenon uncommon in natural cow dung and soil mixtures. This article investigates the water-resistance behaviour of cow-dung stabilised compressed earthen blocks (CD-CEBs) through an extensive experimental programme to understand the influence of cow-dung and soil related factors and to characterise the components of cow-dung responsible for its water resistance. It was found that the small-sized microbial aggregates (SSMA) present in cow-dung, which are negatively charged hydrophobic aggregates of low specific surface area, are responsible for enhanced water resistance of CD-CEBs. The insights gained from experiments are compiled to recommend the following strategies for improved performance of CD-CEBs: (i) The use of wet cow-dung is advised over dry cow-dung as it provided over 80 times better water resistance; (ii) Adopting a higher compaction liquid content (by 3%) improved the water resistance by over 40 times; (iii) The water resistance of CD-CEBs was improved over 30 times by using soils rich in low-swelling clay minerals such as kaolinite. A case study applying these findings demonstrates the successful scaleup from the lab to field showcasing potential of cow-dung and soil in low-carbon construction.
More Related Videos
Related Concept Videos
Brick Durability, Strength, and Appearance
Design Example: Managing Concrete Workability
Permeability of Concrete
Manufacture of Concrete Masonry Units
These wet blocks are then transported for curing, which can occur in one of two environments: a...
Behavior of Concrete Under Compressive Load
As the concrete specimen fractures under...
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...

