Related Experiment Video
Updated: Aug 9, 2026

Fabrication and Characterization of a Conformal Skin-like Electronic System for Quantitative, Cutaneous Wound Management
Published on: September 2, 2015
Electrochemical characterisation of new textile electrodes based on a conductive silicon yarn for bioelectrical
Irene Lange1, Tim Kalla2, Laureen Wegert2
1Institute of Biomedical Engineering and Informatics, Technische Universität Ilmenau, Ilmenau, Germany. irene.lange@tu-ilmenau.de.
Abstract:
Transcutaneous electrical stimulation for therapeutic applications relies on electrodes that interface with the human skin. Alongside hydrogel and rubber electrodes, textile electrodes are becoming increasingly important. We introduce a novel textile electrode based on conductive silicone yarn and analyse the electrochemical characteristics. We consider two realisations of the electrode, one with a snap lead button and one where the yarn itself is used for contacting to a cable. Characterisation was done in contact to 0.9% sodium chloride solution. Impedance spectroscopy was performed over 24 h in the frequency range from 0.1 Hz to 1 MHz. Open-circuit potential measurements were taken over 12 h. Voltage and current noise were analysed in the time domain for one hour, and the power spectral density was calculated for a frequency range from 0 to 500 Hz. Our new textile electrodes showed median impedances of 19.6 kΩ at 0.1 Hz and 98 Ω at 1 MHz, which are similar or lower compared to previously introduced stimulation electrodes. The conductive silicone yarn exhibited higher impedances. Noise characteristics and potential stability of the electrodes and the electrode material were comparable to conventional types. In addition to their electrochemical performance, the new textile electrodes offer the skin compatibility of rubber electrodes and the high comfort of textile electrodes, rendering them a promising, sustainable and user-friendly alternative for bioelectrical stimulation applications.
Related Concept Videos
Charging Conductors By Induction
Generally, conductors like metals do not allow any excess charge to be present on them. Any excess charge added to metals easily flows away, for example, when a metal is placed on the Earth. This process is called earthing.
However, conductors can be charged by a process called induction. For example, consider charging a...
The Electrical Double Layer

