Optimized scheduling of integrated energy systems: a multi-dimensional electricity, hydrogen, ammonia, heat synergy
Naiwei Tu1, Jinda Yang2, Xin Yan1
1Faculty of Electrical and Control Engineering, Liaoning Technical University, Huludao, 125105, Liaoning Province, China.
Abstract:
To enhance the accommodation capability and operational flexibility of renewable energy systems, address the insufficient architectural integration of existing ammonia-based energy systems, and overcome the limitations of current optimization algorithms in tackling complex nonlinear multi-objective problems, this paper proposes a synergistic integrated energy system with liquid ammonia as the central hub. The system integrates multi-energy flows encompassing electricity, hydrogen, ammonia, and heat, leveraging ammonia fuel cell power generation, ammonia cracking, and ammonia-blended gas turbines for both electricity and heat production. A bi-level optimization model is formulated, coupling upper-layer multi-objective capacity planning with lower-layer stochastic chance-constrained scheduling. To solve this model, a hybrid algorithm, designated as LSDBO-WOA, is developed by integrating an improved dung beetle optimizer (LSDBO) with the whale optimization algorithm (WOA). Case study results demonstrate that the proposed algorithm achieves markedly superior convergence performance compared to benchmark algorithms such as non-dominated sorting genetic algorithm II (NSGA-II), with an improvement of approximately 18.6% in comprehensive performance metrics. Furthermore, the proposed electricity-hydrogen-ammonia-heat system attains an overall energy efficiency exceeding 97.66% and reduces carbon emissions by 7.3% relative to the original system without ammonia integration.
Related Concept Videos
Distributed Loads: Problem Solving
Maximum Power Flow and Line Loadability
Linear time-invariant Systems
The input-output behavior of an LTI system can be fully defined by its response to an impulsive excitation at its input. Once this impulse response is known, the system's reaction to any other input can be...
Distributed Loads
For example, consider a bookshelf filled with books stacked vertically adjacent to each other. The weight of the books is evenly distributed over the length of the shelf. As a result, the pressure at different locations on the surface of the...
Fast Decoupled and DC Powerflow
Power System Distribution
The transmission system is designed...

