Effects of Carbon Fillers on Electrical and Mechanical Properties of Water-Based Polymer Nanocomposites

Both the electrical conductivity and tailored mechanical characteristics-showing flexibility and structural integrity-are key properties of polymer composites. In this work, a novel, simple, and water-based strategy for synthesizing rGO-MWCNT/polymer composites was developed. Namely, carbon nanofillers in a mixture of reduced graphene oxide (rGO) and multi-walled carbon nanotubes (MWCNTs) were incorporated in a waterborne methacrylic polymer matrix at loadings of 0.25, 0.5, and 1.0 wt.% nanofiller, and with rGO-to-MWCNT ratios of 10:1, 1:1, and 1:10 (w/w) at room temperature. Electrically conductive composites were obtained with all tested filler rates showing the highest conductivity (up to 8.2 × 10^-3 Sm^-1) for the MWCNT-rich filler due to the formation of a segregated network of the filler in the matrix. The mechanical properties of the composites-characterized by their Young's modulus and elongation at break-strongly depended on both the filler incorporation rate and the rGO:MWCNT ratio. For instance, soft and flexible composites were obtained by incorporating 0.25 wt.% of the MWCNT-rich filler, which increased the elongation at break from 154.2% (neat polymer) to 252.4%. Overall, this study emphasizes the sensitive interplay between carbon filler introduction incorporating conductivity and the fillers' impact on the mechanical properties of a polymer composite, both necessitating careful optimization for applications, e.g., in flexible electronics.