Related Experiment Video
Updated: Mar 15, 2026

Effective Analysis of Human Exposure Conditions with Body-worn Dosimeters in the 2.4 GHz Band
Published on: May 2, 2018
Electromagnetic Exposure Assessment of 5G Mobile Phones: SAR and Thermal Distribution in a Multi-Layer Human Head
Dengpeng Chen1, Bingtao Zhang2
1School of Electronic Information, Xi'an Railway Vocational & Technical Institute, Xi'an 710014, China.
Abstract:
The rapid deployment of 5G technology has raised public concern regarding the potential health effects of electromagnetic radiation from mobile devices. This study systematically evaluates the specific absorption rate (SAR) and temperature distribution in a multi-layer spherical head model exposed to near-field radiation from a 5G mobile phone antenna. A planar inverted-F antenna (PIFA) covering the 3.5 GHz band was integrated into a smartphone model, and simulations were performed in COMSOL Multiphysics 6.3 under input powers of 21 dBm and 24 dBm at varying antenna-head distances. The results show that the peak SAR in the brain layer remained at 0.034 W/kg and 0.065 W/kg for the two power levels, both well below the International Commission on Non-Ionizing Radiation Protection (ICNIRP) safety limit of 2 W/kg. The highest SAR occurred in the scalp layer, decreasing gradually through the skull and brain tissues. After 30 min of exposure, the maximum brain temperature reached only 37.223 °C, far lower than the thermal damage threshold. Increasing the antenna-head distance from 5 mm to 30 mm reduced SAR by up to 50.2%, while temperature variations remained negligible (≤0.18%). These findings demonstrate that under typical usage conditions, 5G mobile phone radiation complies with international safety standards and poses no significant thermal risk, thereby contributing to a deeper understanding of bio-electromagnetic interactions and supporting ongoing wireless-communication safety assessments.
Related Concept Videos
Absorption of Radiation
Biological Effects of Radiation
Applications of EMF Measurements
Assessing Body Temperature - Oral
Step 1:
Start by practicing proper hand hygiene to prevent the spread of microorganisms.
Step 2:
Take the thermometer out of the charging unit, switch it on, and wait for the ready sign.
Step 3:
Gently slide the probe cover until a click is heard. This simple action prevents cross-contamination and ensures the correct placement of the probe cover.
Step 4:
Instruct the patient to open their mouth and place...
Assessing Body Temperature - Tympanic membrane
Step 1: Begin by practicing good hand hygiene to prevent the transmission of microorganisms.
Step 2: Turn on the thermometer and wait until the ready sign appears on the screen to ensure accurate measurement.
Step 3: Slide the probe cover in place to prevent cross-contamination.
Step 4: Instruct the patient to tilt their head to the side for comfort and check for cerumen...

