A Defined-Area Bonding Approach for Microtensile Testing: A Reliable Alternative to Monoblock Sectioning for...

The microtensile bond strength (μTBS) test is the gold standard for evaluating adhesive performance in restorative dentistry. However, the conventional non-trimming technique-referred to in this study as the monoblock sectioning technique (MST)-is difficult to apply to hard and brittle CAD/CAM materials such as zirconia and ceramics, thereby limiting test reproducibility. This study compared a newly developed defined-area bonding (DAB) method with MST to determine whether DAB could serve as a reliable specimen preparation technique for μTBS testing.

CAD/CAM resin blocks and resin core materials were bonded using either ESTECEM II or Panavia V5. MST specimens were obtained by bonding the blocks first and subsequently sectioning them into individual beams. In contrast, DAB specimens were produced by pre-shaping the sticks and bonding them within a defined 1 mm² area. μTBS, failure modes, and fracture/interface morphology (SEM) were evaluated.

MST produced significantly higher μTBS values than DAB (p < 0.001), with central MST beams showing the highest bond strengths. DAB values were statistically equivalent to MST peripheral values for both cements. More than 80% of failures were cohesive within resin cement across all groups. SEM revealed uniform cement layer thickness (50-60 μm) and similar peripheral-like fracture patterns in DAB specimens.

Although MST yielded higher μTBS overall, the DAB method produced bond strengths equivalent to the MST peripheral region and demonstrated consistent fracture characteristics. Because DAB requires minimal cutting, it offers a promising, reproducible approach for μTBS testing of high-hardness materials that are otherwise difficult to section.