A G-Code-Driven Modeling and Thermo-Mechanical Coupling Analysis Method for the FDM Process of Complex Lightweight Structures

Accurate prediction of thermo-mechanical behavior in Fused Deposition Modeling (FDM) is often limited by mismatches between idealized Computer-Aided Design (CAD) geometry and path-dependent material deposition. This paper presents a G-code-driven, filament-level modeling and process-simulation workflow for complex geometries and infill strategies, especially toolpaths with in-plane inclinations. Extrusion segments are parsed from slicing G-code to obtain endpoints and process parameters, and each filament is reconstructed as a path-aligned rectangular bead using a dedicated local coordinate system. Progressive deposition is simulated in ANSYS Parametric Design Language (APDL) via an element birth-death method, enhanced by a centroid-based element selection strategy that reduces dependence on strictly aligned hexahedral partitions and improves robustness for complex meshes. A nonlinear transient thermal analysis is performed, and temperatures are mapped to the structural model through an indirect thermo-mechanical coupling scheme to predict warpage and residual stresses. Case studies on square plates with triangular and hexagonal infills (with/without sidewalls and a bottom base) show that the high-temperature zone follows newly deposited paths with peak temperatures near 220 °C, while displacement and von Mises stress accumulate and are strongly affected by infill topology and boundary conditions.