Development of ionic polymers: novel [SPVP]TfO-graphene nanocomposites for sustainable water treatment and enhancing...

The synthesis and application of a novel nanocomposite material for dye removal from aqueous solutions is described in this work. The nanocomposite consisted of sulfonated poly(vinylpyrrolidonium) triflate [SPVP]TfO reinforced with graphene nanosheets (G). Various concentrations of graphene (0.2-10 wt%) were incorporated into the [SPVP]TfO matrix via in situ polymerization. The resulting nanocomposites were extensively characterized using multiple analytical techniques, including FT-IR, Raman spectroscopy, XRD, SEM, TEM, and thermal analysis, confirming the successful integration of graphene and the formation of well-defined nanocomposite structures. The adsorption performance of the [SPVP]TfO-G nanocomposites for Acid Red 1 (AR) dye removal was thoroughly investigated under various experimental conditions. Optimal adsorption was achieved at pH 2 with an adsorbent dosage of 20 mg and contact time of 90 min. Kinetic studies revealed that the adsorption process followed pseudo-second-order kinetics, while thermodynamic analysis indicated the endothermic and spontaneous nature of adsorption. The Langmuir isotherm model best described the adsorption equilibrium, with a maximum adsorption capacity of 21.96 mg g^-1 for AR dye. The nanocomposites demonstrated excellent performance in removing AR dye from real water samples, including seawater, wastewater, and tap water, with removal efficiencies above 93%. In addition, the nanocomposites exhibited good reusability over four adsorption cycles, highlighting their potential as efficient and sustainable adsorbents for the removal of dye pollutants from aqueous environments.