Related Experiment Video
Updated: Jul 14, 2026

The Modular Design and Production of an Intelligent Robot Based on a Closed-Loop Control Strategy
Published on: October 14, 2017
Fuzzy Neural Network-Based Data-Driven Robust Model Predictive Control for Wastewater Treatment Processes Under
None:
The data transmission in wastewater treatment processes (WWTPs) depends on wireless networks. However, limited network bandwidth frequently results in data packet losses. Moreover, intermittent sensor faults caused by sludge adhesion and sensor aging can induce probabilistic sampling (PS). These communication constraints degrade control system performance and stability, while external disturbances further complicate dynamics. To address these challenges, a data-driven robust model predictive control (DRMPC) approach is proposed to stabilize WWTPs under communication constraints and external disturbances. First, an equivalent PS (EPS) model is established to characterize the double randomness introduced by communication constraints, including PS and consecutive packet losses (CPLs). Then, based on the EPS model, a two-loop control framework is constructed. Specifically, a nominal model predictive control (MPC) is designed as a nominal control loop to steer the nominal output to the reference trajectory, where a multistep identifier is designed to capture the unknown dynamics of the nominal system. Then, the cost function is formulated by incorporating the expectation of predictive outputs and the variation in control error, which effectively enhances the tracking control capability of the nominal system. Furthermore, a fuzzy neural network (FNN) controller is constructed as a feedback control loop to regulate the error system to mitigate the effect of external disturbances, ensuring that the actual output converges to the nominal output. Finally, a theoretical proof of system stability is provided. Meanwhile, the proposed DRMPC scheme is experimentally validated on the Benchmark Simulation Model No.1 (BSM1) for WWTPs, demonstrating its effectiveness.
Related Concept Videos
Control Systems
At the heart...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Bioreactor Controls-I
