Effect of Thermal Post-Treatment on the Mechanical Performance and Microstructure of Modified Photosensitive...

We investigate 3D-printed composite materials composed of a photosensitive polylactic acid (PLA) resin blended with 10% starch and fabricated by Digital Light Processing. We synthesize the 3D-printed composites by incorporating a post-processing stage involving thermomoulding at various temperatures ranging from 50 °C to 150 °C. The composition, structure, and thermal and mechanical performance of the 3D-printed composites are evaluated using infrared spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), synchrotron X-ray microtomography and tensile testing assisted with digital image correlation. Our results indicate that post-treatment influences the mechanical behaviour of the composites, leading to a moderate increase in stiffness while the tensile strength remains slightly reduced compared with the reference condition, particularly when moulding temperatures reach 100 °C. Our 3D printing approach combined with the photosensitive/starch blend provides a cost-effective alternative for obtaining 3D-printed biosourced components, maintaining technical performance at a reasonable cost.