Manufacture of artisanal dry-cured hams: a European perspective

The process of manufacturing concrete masonry units begins by mixing stiff concrete composed of Portland cement, aggregates, and water. This mixture is then poured into metal molds. To ensure the concrete settles uniformly and to avoid separation of its components, the mixture in the molds is subjected to vibration. Shortly after, the still-wet blocks are removed from the molds and placed on racks.
These wet blocks are then transported for curing, which can occur in one of two environments: a...

Concrete members with a small surface-to-volume ratio are cured by oiling and moistening the forms before casting the concrete member. These forms can be left in place for a prolonged period to prevent moisture loss, and can be wetted if made of a material suitable for wetting. If the forms are removed early, the concrete member is moistened and covered with polythene sheets to maintain moisture. For large horizontal concrete surfaces exposed to dry weather, a temporary covering is suspended...

Seasoning of wood is a crucial process aimed at reducing and stabilizing the moisture content within the wood to prevent future shrinkage, structural damage, or aesthetic issues once the wood is used in construction. Wood naturally swells when it absorbs moisture and contracts as it dries.
Achieving equilibrium moisture content is the goal of seasoning; this is the point where the wood's moisture content stabilizes to align with the moisture levels of the surrounding environment. Proper...

Penicillin, one of the earliest and most widely used antibiotics, is produced industrially by the filamentous fungus Penicillium chrysogenum. Large stirred-tank bioreactors ranging from tens to hundreds of thousands of liters maintain tightly controlled temperature, pH, and dissolved oxygen conditions to support fungal metabolism and maximize antibiotic yield. Penicillin is a secondary metabolite, synthesized primarily during the stationary growth phase, which requires a carefully managed...

Lactic acid bacteria (LAB) and molds are instrumental in fermenting plant-based foods to enhance preservation and ensure year-round availability. These microbial processes convert plant carbohydrates into organic acids and other metabolites that inhibit spoilage organisms and contribute to the sensory qualities of the final product.In sauerkraut production, cabbage goes through a microbial succession that starts with cocci such as Leuconostoc mesenteroides. These microbes begin fermentation by...

Industrial insulin production uses genetically engineered E. coli expressing a proinsulin gene controlled by a tryptophan promoter and containing a methionine linker for later cleavage. The cells also carry ampicillin resistance for selective growth. Seed cultures are stored at −80 °C and production begins by thawing a small amount to inoculate starter cultures, which are progressively scaled to a 50,000-L bioreactor. In the bioreactor, E. coli grow in nutrient-rich media under...