PLA Biocomposites Reinforced with Cinnamon-Treated Flax Fibers

In this research, PLA biocomposites reinforced with 20 wt% flax fibers modified with 1, 5, 10, and 20% concentrations of trans-cinnamic acid (TC) were prepared. The materials were systematically characterized to evaluate their structural, thermal, viscoelastic, surface, and functional properties. Thermal stability and phase transitions were analyzed using thermogravimetric analysis (TG) and differential scanning calorimetry (DSC), while viscoelastic behavior and molecular relaxation processes were investigated by dynamic mechanical analysis (DMA). To elucidate failure mechanisms and interfacial quality, fracture surface morphology after tensile testing was observed using scanning electron microscopy (SEM). Surface wettability was determined through water contact angle measurements, and antibacterial activity against Escherichia coli and Staphylococcus aureus was evaluated to assess the functional potential of the developed biocomposites. The results demonstrated that moderate fiber modification improved interfacial adhesion and enhanced thermo-mechanical performance. The highest contact angles were observed for 5% and 10% TC concentrations, indicating increased surface hydrophobicity, while strong antibacterial activity (R ≥ 6) was achieved for 10% and 20% TC. The research confirms that trans-cinnamic acid concentration governs multiple structure-property relationships, enabling controlled tuning of mechanical reinforcement and antibacterial functionality.