A Self-Propelled Traveling-Wave Linear Ultrasonic Motor Based on End Excitation

Ultrasonic motors have attracted considerable attention in precision actuation applications because of their advantages over conventional electromagnetic motors, such as compact structure, high positioning accuracy, immunity to electromagnetic interference, noise-free operation, and suitability for low-temperature environments. However, conventional traveling-wave linear ultrasonic motors usually rely on boundary constraints to establish stable traveling waves, which may limit their structural flexibility and self-propelled capability. To address this issue, this paper proposes a free-boundary traveling-wave linear ultrasonic motor capable of realizing self-propelled motion. The motor features a projection structure at each end of the stator. Two piezoelectric ceramics are placed at one end for excitation, while a damping material is arranged at the other end for energy absorption. This design enables the motor to generate traveling waves without requiring fixed boundary conditions. The motor operates in the B(3,1) out-of-plane vibration mode to enhance the energy absorption capacity of the non-excited end and reduce its standing wave ratio (SWR). A finite element model of the motor is established to investigate its vibration characteristics. In addition, a novel method for estimating the standing wave ratio is proposed by using piezoelectric ceramics attached to the motor surface, replacing the traditional calculation approach. A prototype is fabricated to verify the feasibility of the proposed design. Experimental results show that the prototype achieves a minimum SWR of 1.81, a no-load speed of 42.1 mm/s, and a maximum output force of 0.465 N. These results confirm the feasibility of the proposed scheme and provide a new approach for the design of free-boundary traveling-wave linear ultrasonic motors.