A Ku-Band 13 W GaN HEMT Power Amplifier MMIC with a Coupled-Line Interstage Stabilization Technique for Radar Sensor...

This paper presents a 13 W Ku-band GaN HEMT MMIC power amplifier employing a coupled-line interstage stabilization technique for radar sensor front-end applications. High-efficiency and stable power amplification in the Ku-band is essential for radar sensing systems, where low-frequency instability and process sensitivity often limit multistage GaN amplifier performance. To address these challenges, a coupled-line interstage network is introduced instead of conventional series capacitors and parallel RC stabilization circuits. The proposed structure effectively suppresses low-frequency gain while maintaining RF performance and improving robustness against process variations due to its planar transmission-line implementation. The two-stage power amplifier was fabricated using a 0.25 μm commercial GaN HEMT MMIC process. For compact implementation, the coupled-line structure was realized in a meandered layout and verified through full electromagnetic simulations. Measured small-signal results show a gain (S21) of 18.6-21.6 dB, with input and output return losses (S11 and S22) of -3.3 to -10.2 dB and -4.4 to -7.2 dB, respectively, over 13.5-16 GHz. Large-signal measurements demonstrate a saturated output power of 40.7-41.5 dBm and a power-added efficiency of 21.3-28.1% across the same frequency range. The fabricated MMIC achieved stable operation without oscillation, validating the effectiveness of the proposed coupled-line stabilization approach for Ku-band radar sensor systems.