Thickness-driven modulation of linear and nonlinear optical properties in La-Al co-doped ZnO thin films for optical...

The influence of film thickness on the structural, surface, optical, and nonlinear optical properties of Al-La co-doped ZnO thin films was systematically examined. By adjusting the number of deposition cycles, film thicknesses in the ranges of 200-300 nm, 400-500 nm, and 700-800 nm were obtained. Powder X-ray diffraction (PXRD) analysis confirmed a hexagonal wurtzite crystal structure. Slight shifts in the (002) peak position with increasing film thickness indicated lattice parameter changes, and the decrease in peak width suggested improved crystallinity. Field emission scanning electron microscopy (FESEM) micrographs revealed that larger grain sizes developed as the films became thicker. Correspondingly, the surface roughness increased from 2.61 nm to 3.91 nm. The optical band gap exhibited a shift from 3.21 eV to 3.34 eV with increasing thickness. Z scan technique demonstrated that La-ZnO films possess self-defocusing characteristics, a positive nonlinear refractive index, and reverse saturable absorption (RSA). The third-order nonlinear optical susceptibility of the film increased from 200-300 nm to 400-500 nm thickness and decreased at 700-800 nm thickness due to the increased scattering and saturation effects associated with larger grain sizes and surface roughness at greater thicknesses, which can limit the efficiency of nonlinear interactions. Among the studied thicknesses, the 486 nm film exhibited the highest third-order nonlinear optical susceptibility, indicating that this thickness offers an optimal balance of crystallinity, grain size, and surface morphology for enhanced nonlinear optical performance.