Related Experiment Video
Updated: May 14, 2026

Plasma-assisted Molecular Beam Epitaxy of N-polar InAlN-barrier High-electron-mobility Transistors
Published on: November 24, 2016
Terahertz Antenna-Coupled Wire-Channel Field-Effect Transistors Based on AlGaN/GaN Heterostructures
Maxim Moscotin1, Justinas Jorudas1, Pawel Prystawko2
1Terahertz Photonics Laboratory, Center for Physical Sciences and Technology (FTMC), LT-10257 Vilnius, Lithuania.
Abstract:
We propose a terahertz (THz) antenna-coupled wire-channel field-effect transistor-modified EdgeFET (m-EdgeFET), formed by combining single-gate FinFET and dual-side-gate EdgeFET concepts, which is used for THz detection. The proposed hybrid design was implemented on AlGaN/GaN high-electron-mobility transistor (HEMT) structures, demonstrating distinct response characteristics under 150 GHz and 300 GHz radiation at room temperature. The responsivity dependence on the channel length was determined, revealing that the peak responsivity reached up to 6.5 V/W at a gate voltage of -3 V, i.e., at a gate bias that is an order lower in magnitude than that required for EdgeFET to reach the maximum response. Meanwhile, the gate leakage current decreased by an order of magnitude (to about 1 nA) compared to a FinFET with similar geometry. The proposed geometry was shown to operate in two regimes: source-drain coupling (SD) and gate coupling (GG) of THz radiation with the transistor wire channel. The results confirm that the m-EdgeFET design is suitable for electrically controlled and fast THz detection.
Related Concept Videos
Field Effect Transistor
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the gate...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity arises...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The semiconductor's...

