Wide-Range, Low-Hysteresis Soft Sensor with Architecture-Inspired Design Enabled by Femtosecond Laser-Induced...

Resolving the dichotomy between wide detection ranges and low mechanical hysteresis remains a critical challenge in flexible electronics, largely governed by the intrinsic viscoelastic creep of polymeric dielectrics. Drawing inspiration from the distinctive load-bearing mechanisms of traditional Chinese Sparrow Brace architecture, we report a mechanically optimized tilted micro-architecture designed to enhance structural resilience. Unlike conventional soft elastomeric pillars that easily succumb to mechanical failure, this BOPS-based tilted geometry provides excellent load-bearing capacity, effectively preventing premature failure. Finite element analysis (FEA) confirms that this tilted geometry forces a fundamental shift from conventional bulk compression to structural bending. Because this bending-dominated architecture drives rapid elastic recovery, it significantly mitigates the severe effects of the polymer's viscoelastic creep under the tested loading conditions, achieving reliable signal reversibility with low hysteresis. We fabricated this specific architecture via programmable femtosecond laser direct writing (FsLDW) on biaxially oriented polystyrene (BOPS) films, harnessing the material's entropy-driven self-growth kinetics. By merging this localized growth mechanism with the architectural design, we effectively bypassed the complexities of traditional molding, achieving mask-free, in situ growth of large-scale, highly uniform dielectric micro-arrays. The resulting sensor delivers a remarkably broad working range (up to ~2.28 MPa) coupled with a negligible recovery error (~1.3%), an agile dynamic response (~70/80 ms), and consistent operational durability. Ultimately, this work combines architecture-inspired structural design with advanced femtosecond laser surface microengineering, providing a conceptually novel and scalable pathway for next-generation flexible sensing.