Related Experiment Video
Updated: May 14, 2026

Advanced Self-Healing Asphalt Reinforced by Graphene Structures: An Atomistic Insight
Published on: May 31, 2022
Performance Evaluation of Recycled Aged Rubber Modified Asphalt Mixtures with Soybean Oil Rejuvenator
Kwadwo Ampadu Boateng1, Meng Wu1, Dongzhao Jin1
1Department of Civil, Environmental, and Geospatial Engineering, Michigan Technological University, 1400 Townsend Drive, Houghton, MI 49931-1295, USA.
Abstract:
This study evaluates the performance of recycled, long-term-aged rubber-modified asphalt (RMA) mixtures rejuvenated with soybean oil. Crumb rubber is widely used in asphalt mixtures for its ability to enhance elasticity, crack resistance, and durability. However, long-term aging leads to oxidative hardening, increased stiffness, and reduced cracking resistance, creating a need for effective rejuvenation strategies. To simulate extended field aging, plant-produced RMA mixtures were conditioned at 85 °C for five and ten days and subsequently treated with 10% soybean oil by binder weight. Mechanical performance was assessed using the Disc-Shaped Compact Tension test, Indirect Tensile Asphalt Cracking Test, Hamburg Wheel Tracking Test, and Rapid Shear Rutting Test. Rejuvenation effectively reversed aging-related deterioration, increasing fracture energy by 137-211% and improving cracking tolerance indices by 22-104%, thereby restoring or surpassing the cracking performance of unaged RMA mixtures. This improvement in flexibility was accompanied by reduced rutting resistance, with rutting tolerance indices decreasing by 52-70%, consistent with the softening effect of bio-based oils. Performance space diagrams further illustrated the trade-off between enhanced cracking resistance and increased rut susceptibility. Overall, the results demonstrate that soybean oil provides strong restorative capabilities for aged RMA mixtures, but achieving balanced field performance requires optimization of rejuvenator dosage.
Related Concept Videos
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...
Toughness and Hardness of Aggregate
Design Example: Managing Concrete Workability
To address...
Additives and Fillers in Concrete
The...
Fatigue Strength of Concrete

