Related Experiment Video
Updated: May 23, 2026

Watershed Planning within a Quantitative Scenario Analysis Framework
Published on: July 24, 2016
Dynamic weight and sensitive factor-based geological suitability evaluation of underground space development in
Liang He1,2,3, Liting Ma4, Shuhan Shi4
1School of Environmental Science, Nanjing Xiaozhuang University, Nanjing, 211171, Jiangsu, China. heliang@njxzc.edu.cn.
Abstract:
This study proposes a comprehensive evaluation model integrating dynamic weighting (DW) and sensitive factor evaluation (SFE) to assess underground space development in the Hangjiahu Plain. The model constructs a refined index system by analyzing the engineering geological conditions across shallow (0-10 m), middle (10-30 m), and deep (30-60 m) layers, and introduces variable weight theory to dynamically adjust the weight, thus addressing key limitations of the traditional fixed-weight model. The results showed that the area of the forbidden development zone of Grade IV in the shallow layer increased substantially and was mainly affected by the thickness of the soft soil. The area of Grades I and II in the middle layer decreased from 97.42% to 51.49%, while the area of Grade IV in the deep layer increased to 81.96%. All sensitive factors are located in the Grade IV area, which is further expanded after weight adjustment, indicating that the model can effectively identify high-risk areas. The model was further examined through a rail transit planning and route selection case in the study area, providing contextual support for its applicability at the regional planning stage. This study provides a theoretical basis for sustainable urban underground space utilization and a reference for similar geological regions.
Related Concept Videos
Specific Gravity of Aggregate
Bulk or gross specific gravity is calculated by taking the ratio of the mass of aggregates in the saturated surface-dry state to the total volume that includes both the solids and the voids within the...
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Dynamic Modulus of Elasticity of Concrete
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by a...
Design Consideration
The factor of safety is another key aspect...
Density, Specific Weight, Specific Gravity and Compressibility of Fluid
Specific weight represents the weight per unit volume and is calculated by multiplying density...
Yield Criteria for Ductile Materials under Plane Stress
The Maximum Shearing Stress Criterion, also known as the...

