Experimental Performance Comparison of a Modular Water-Based Photovoltaic-Thermal System Under Multiple Hydraulic...

In Brazil, more than 80% of households rely on electricity for water heating, representing approximately 13% of residential electricity consumption and significantly contributing to peak grid demand. As a prominent alternative for supplying household thermal energy and reducing grid stress, this study experimentally evaluates, under tropical climate conditions, the performance of a modular water-based photovoltaic-thermal (PVT) system and compares it with a conventional photovoltaic (PV) system operating simultaneously under identical environmental conditions. The PVT system, based on commercial PV modules coupled to roll-bond heat exchangers, a storage tank, and a shower outlet, was tested under three hydraulic regimes: natural thermosiphon, closed-loop, and Forced circulation. A dedicated ESP32-based data acquisition system, integrated with a cloud platform, continuously monitors electrical, thermal, and meteorological variables. Results show that PVT modules exhibit a small electrical efficiency reduction due to increased cell temperatures, which is largely compensated by the simultaneous thermal generation, yielding overall efficiency gains of 74.04%, 76.53%, and 7.62% over the reference PV system for Normal, Forced, and Closed circulation, respectively. The comparative analysis identifies Forced-circulation scheduling and the matching between thermal generation and consumption as key factors for performance optimization. The findings provide practical guidelines for deploying PVT systems to replace electric showers in tropical regions, reducing residential electricity consumption and mitigating peak-demand stress on the grid.