Full-field X-ray fluorescence imaging using a Fresnel zone plate as a coded aperture: optimized reconstruction...

This study represents the first feasibility demonstration of hyperspectral X-ray absorption near-edge structure (XANES) mapping performed using a full-field fluorescence imaging approach. This method may be useful in many research fields for determining the spatial distributions of the different oxidation states of an element present at low concentration in X-ray beam-sensitive samples. It was demonstrated that this approach could be easily performed using a full-field imaging method where a Fresnel zone plate (FZP) was employed as a coded aperture, which represented a practical, fast and dose-efficient alternative to the raster-scanning technique, when these two approaches were tested at a beamline not dedicated to X-ray imaging. The basic form of the reconstruction algorithm, which was derived from inline holography, was optimized. This enabled the spatial resolution and overall quality of the reconstructed image to be improved. The ∼62 µm spatial resolution experimentally achieved may be further optimized to about 5 µm using a smaller FZP and larger detector than those used in this investigation. The XANES spectra corresponding to the main chemical species present in the sample, obtained from the tested hyperspectral spectroscopy approach, did not exactly match those expected, as they depended on several empirical processing steps. While these results can be further improved by optimizing the linearity of the detector output via pile-up corrections, further work is needed to establish robustness against variations in masking, background treatment, and intensity-correction choices, especially for studying diluted specimens whose corresponding pixel intensities are similar to those of the background.