Mechanical Performance of Uncompatibilized Recycled Polypropylene Biocomposites Filled with Corn, Banana, and Barley...

Recycled polypropylene (rPP) biocomposites represent a convergent strategy for plastic waste valorization and agro-industrial residue reutilization. This study quantifies tensile, flexural, and compressive performance (ASTM D638, D790, D695) of rPP biocomposites incorporating raw corn stover (Zea mays), banana pseudostem (Musa spp.), and barley residue (Hordeum vulgare) fibers at 10, 20, and 30 wt%, processed by single-screw extrusion and compression molding without compatibilizer. Two-way ANOVA with Tukey HSD post hoc analysis (α = 0.05) evaluated effects of fiber type and concentration. Tensile strength declined monotonically across all systems, from 24.9 MPa (neat rPP) to 7.9 MPa at 30 wt% banana fiber. Corn fiber exhibited exceptional tensile concentration stability (only -11% across the full range) and the best flexural retention at 10 wt% (36.6 MPa, 79% of neat rPP). A performance plateau was identified at 20 wt% under both tensile and flexural loading, beyond which further addition produced no significant reduction. Under compression, fiber type exerted its largest statistical effect (F = 81.231), all three systems were mutually distinguishable, and no plateau was observed. These results establish a loading-mode-resolved mechanical baseline for uncompatibilized rPP biocomposites, with corn fiber at 10-20 wt% as the most versatile formulation across all loading modes.