VNA-Based Vector Reflection Coefficient Measurement Technique for Powered RF Signal Generators

The reflection coefficient measurement of the RF signal generator output is clear when the signal generator output is turned off, as no interfering signal is present. However, measuring the reflection coefficient while the signal generator output is turned on creates complexity, as the generator's output power can interfere with the reflected signal. A vector network analyzer (VNA) is the reference instrument for measuring the reflection coefficient, capturing both the magnitude and phase of scattering parameters. For measuring the active output of a signal generator, the signals created by the generator and the VNA must be isolated to prevent signal mixing and interference. This paper proposes a unique method to measure the output reflection coefficient of an RF signal generator when the output is on, using a VNA configured for one port reflection coefficient measurement. The method involves tuning the VNA receiver to a frequency slightly offset to the generator's output. Simultaneously, selecting a narrow intermediate frequency bandwidth (IFBW) reduces the receiver's noise floor and also eliminates out-of-band interference. As a result, the VNA and the generator operate in different frequency bands to avoid interferences between them, enabling accurate magnitude and phase measurements. To automate the process, a Windows-based software has been developed. This software automates the measurement sequence, controls generator power levels and VNA sweep parameters, captures both the magnitude and phase of the reflection coefficient, and records the result data. It also supports measurement at different output power levels, enabling characterization across a wide range of operating conditions.