Related Experiment Video
Updated: Jun 23, 2026

Experimental Investigation of the Hierarchical Control in DC Microgrids Using a Real-time Simulator
Published on: February 14, 2025
Resilient fractional order sliding mode control for islanded microgrids under cyber-physical attacks
Mohamad Issa Ibraheem1, Mehdi Edrisi2, Hassan Haes Alhelou3
1Sustainable Energy Research Center, Sultan Qaboos University (SQU), Muscat, Oman.
None:
The integration of Information and Communication Technologies (ICT) in power system applications, such as Load Frequency Control (LFC), increases the vulnerability to cyber-attacks. Among these, False Data Injection Attacks (FDIA) targeting sensor-controller or controller-actuator signals can destabilize systems with varying loads and renewable energy sources. This paper proposes a Fractional Order Sliding Mode Controller (FOSMC) to ensure frequency stability and resilience in an islanded system under controller-actuator FDIA and external disturbances. An observer is incorporated to estimate system states and detect FDIA signals, with its parameters obtained via Linear Matrix Inequality (LMI) techniques. A fractional order sliding surface is designed to enhance robustness, and system stability is analyzed using the Lyapunov method. The proposed controller is validated through a Model-in-the-Loop (MiL) OPAL-RT setup. Experimental results confirm that the resilient controller maintains stability under different FDIA scenarios and outperforms existing methods in dynamic response.
Related Concept Videos
Line Protection with Impedance Relays
Under normal conditions, low load currents keep the measured...
Zones of Protection
Protective zones are defined by closed dashed lines, containing one or more components. A key characteristic of these zones is the strategic placement of...
Fast Decoupled and DC Powerflow
Load-frequency control
Radial System Protection
In a radial system with a fault downstream of the third breaker, ideally, only the third breaker will open, isolating the fault and interrupting the load connected beyond it. The second breaker has a longer delay setting,...
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by: