Related Experiment Video
Updated: Jun 25, 2026

Fabrication of Flexible Image Sensor Based on Lateral NIPIN Phototransistors
Published on: June 23, 2018
Self-Powered, Broadband, and Polarization-Sensitive Photodetector Based on the ReSe2/Ta2NiSe5 van der Waals
Haowei Tao1, Tingting Guo2, Shuoheng Niu1
1MIIT Key Laboratory of Advanced Display Materials and Devices, School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094, China.
Abstract:
Photodetectors that simultaneously integrate high responsivity, fast response, self-powered operation, and polarization sensitivity are highly needed for advanced imaging and optical information processing, yet remain challenging to realize in a simple device architecture. Here, the in-plane anisotropic ReSe2 and narrow-bandgap Ta2NiSe5 are utilized to construct a ReSe2/Ta2NiSe5 van der Waals heterojunction photodetector with self-powered broadband operation from 375 to 850 nm. Under 532 nm illumination in the self-powered mode, the device exhibits a responsivity of 0.381 A W-1 and a specific detectivity of 5.71 × 109 Jones. The device also presents a fast temporal response with rise and fall times of 44 and 70 μs, respectively, as well as a -3 dB bandwidth of approximately 5 kHz, demonstrating excellent weak light and high-speed detection capability. Moreover, under zero bias, the device exhibits photocurrent polarization ratios of 1.56 and 1.83 for the vertically stacked and laterally stacked configurations, respectively, indicating a clear polarization-sensitive photoresponse. Benefiting from these features, the device further enables real-time polarization-resolved imaging of specific patterns and reliable optoelectronic signal recognition. This work establishes a simple and effective strategy for the development of miniaturized, low-power, broadband photodetectors with intrinsic polarization sensitivity based on 2D van der Waals heterostructures.
Related Concept Videos
P-N junction
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...

