Process Integration and Reliability Challenges of Through-Glass Vias for Glass-Based Advanced Packaging: A Focused...

Recent advances in chiplet architectures, heterogeneous integration, 2.5D/3D packaging, high-performance computing, and RF applications have increased the demand for high-density vertical interconnects and low-loss packaging platforms. Glass substrates have attracted considerable attention for next-generation advanced packaging because of their low dielectric loss, high dimensional stability, smooth surface, and compatibility with large-area panel-level processing. Through-glass vias (TGVs) are essential vertical interconnect structures that enable the electrical integration of glass substrates. This focused review summarizes TGV technologies for glass-based advanced packaging from the perspectives of via formation, seed layer deposition, metallization, Cu filling, defect formation, reliability, and plugging-based alternative architectures. Representative TGV formation methods, including laser drilling, selective laser etching, laser-induced deep etching, wet/dry etching, and photosensitive glass processing, are compared. Metallization approaches based on sputtering, electroless plating, ALD/CVD, and hybrid processes are discussed together with Cu electroplating strategies such as conformal plating, bottom-up filling, pulse or pulse-reverse plating, and engineered-geometry filling. Key defects, including voids, seams, pinch-off, seed discontinuity, Cu/glass interfacial delamination, glass cracking, and Cu protrusion, are reviewed in relation to thermomechanical reliability. Finally, polymer/dielectric plugging, plugging/re-drilling, conductive paste plugging, and hybrid Cu/plugging structures are discussed as application-specific alternatives for balancing electrical performance, reliability, manufacturability, yield, and cost.