12Cr2Mo1V Steel for Free-Forged Hydrogenation Reactor Shells: Defect Control, Microstructural Evolution, and Service...

Hydrogenation reactor shells are safety-critical thick-section pressure-bearing components in petrochemical hydroprocessing equipment. Long-term exposure to elevated temperature, high pressure, and hydrogen-bearing media requires not only adequate strength, but also toughness, tempering stability, hydrogen-damage resistance, and through-thickness property uniformity. 12Cr2Mo1V steel, a Chinese Cr-Mo-V reactor steel closely related to vanadium-modified 2.25Cr-1Mo-0.25V steels, is widely used for large-shell forgings because its alloy design supports bainitic transformation, carbide stability, and elevated-temperature performance. This review critically synthesizes studies on 12Cr2Mo1V shell forgings, related Cr-Mo-V reactor steels, and heavy free-forged products. The discussion is organized around alloy design, ingot-derived defect inheritance, defect closure during free forging, bainite-grain-carbide evolution during forging and heat treatment, and the resulting strength, toughness, and hydrogen-service performance. Particular emphasis is placed on the process-defect-microstructure-property linkage in super-thick sections. The review shows that free forging is not merely a forming route, but a decisive metallurgical operation for densification, strain penetration, and precursor-structure conditioning. Future work should integrate casting, free forging, and heat treatment with multiscale characterization and data-enhanced predictive quality control. To further reduce descriptive comparison, this review summarizes standardized quantitative indicators for evaluating forging-route design, heat-treatment response, and prediction-method reliability.