Related Experiment Video
Updated: Jun 27, 2026

Determination of the Friction Coefficients of Icy Pavements Under Different Amounts of Snowfall
Published on: January 6, 2023
Combined Effects of Fast-Melting SBS (F-SBS) and Crumb Rubber (CR) on Asphalt Mixtures Using the Dry Process Method
Jinyao Li1, Hao Wu1, Fengqi Guo1
1School of Civil Engineering, Central South University, 22 South Shaoshan Rd., Changsha 410075, China.
None:
Considering the production efficiency and performance limitations inherent in conventional wet process asphalt mixtures, this study investigates the synergistic potential of fast-melting styrene-butadiene-styrene (F-SBS) and crumb rubber (CR) in enhancing the performance of asphalt mixtures when applied through the dry process modification method. Firstly, high- and low-temperature rheological tests were conducted on modified asphalt containing different dosages of F-SBS (1-3%) and CR (1-10%) to determine the optimal dosage of the modifier for the asphalt mixture. Furthermore, a comprehensive comparative analysis was conducted to evaluate the performance of asphalt mixtures modified with conventional SBS/CR against the F-SBS/CR system across both wet and dry modification processes. Finally, microscopic tests were conducted on the modified asphalt and asphalt mixtures to further investigate the synergistic mechanisms and effects of F-SBS and CR. The results indicated that F-SBS (2.5%)/CR (8%)-modified asphalt exhibited superior rheological properties, enhanced compatibility, and improved storage stability. Additionally, the dry process F-SBS/CR asphalt mixture demonstrated a 12.9% improvement in high-temperature stability, a 19.1% improvement in split strength after freeze-thaw cycles, and a 14.4% improvement in fatigue resistance compared to wet process conventional SBS/CR asphalt mixtures. The microscopic test results indicate that F-SBS and CR modify the asphalt primarily through physical blending. Observations further confirm that the dry process enhances interfacial bonding among the modifiers, asphalt binder, and aggregates, promoting closer and more stable interactions and thus improving mixing efficiency and overall performance. This study confirms the advantages of applying F-SBS and CR in dry process asphalt mixtures, thereby providing guidance for establishing a connection between laboratory investigations and field construction practices in the future.
Related Concept Videos
Types of Cement I
Type I (Ordinary Portland Cement) is widely used for general construction where special properties are not required. It has moderate sulfate resistance and heat of hydration.
Type II (Modified Cement) offers moderate resistance to sulfate attack and a lower rate of heat development compared to Type I. It is suitable for structures in...
Superplasticizers
Accelerators
The effectiveness of calcium chloride can...
Design Example: Managing Concrete Workability
To address...
Hot Weather Concreting
Mitigating the heat increase in concrete can be economically achieved by shading aggregate stockpiles to prevent heating from solar radiation,...
Effects of Air-entrainment in Concrete

